25 mm x 80 cm black piece, 2.8 N/25 mm peel, ±0.3 mm die-cut tolerance.
| Construction | Adjustable Strap with Tri-Glide Slider |
| Width | 25 mm |
| Length | 80 cm |
| Colour | Black |
| Minimum order | 1,000 pcs |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Construction | Adjustable Strap with Tri-Glide Slider |
|---|---|
| Width | 25 mm |
| Length | 80 cm |
| Colour | Black |
| Weight / piece | 7.6 g |
| Peel strength | 2.8 N/25 mm |
| Shear strength | 11 N/cm² |
| Cycle life | 5,000 cycles |
| Service temperature | -20 °C to 75 °C |
| Pieces per carton | 1,000 |
| Minimum order | 1,000 pcs |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 25 mm x 30 cm | Black | 1,000 pcs |
| 25 mm x 50 cm | Black | 1,000 pcs |
| 20 mm x 20 cm | Black | 1,000 pcs |
| 20 mm x 30 cm | Black | 1,000 pcs |
| 20 mm x 50 cm | Black | 1,000 pcs |
| 20 mm x 80 cm | Black | 1,000 pcs |
| 25 mm x 20 cm | Black | 1,000 pcs |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerProduced to the same construction on every run, which is why converters reorder instead of resampling. Most orders go into furniture trim, panel fixing and mid-weight strap assemblies. Minimum order is 1,000 pcs.
Each piece weighs about 7.6 g; 1,000 pieces to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.
Match the strap to what it wraps, not to the load alone. Bundles under 30 mm do better with 12–16 mm ties, cable runs and tool handles with 20–25 mm, and anything carrying weight with 38 mm and a buckle rather than a tie. A strap that is too wide will not cinch tight enough to stop movement.
At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
A tie is faster to fit and cheaper, and is right for anything a technician opens daily. A buckle holds tension better and is what to specify when the strap has to stay tight under load without being re-adjusted. We supply both from the same webbing.
Yes, from 1,000 pieces on woven webbing. Send vector artwork; we will confirm the print area against the strap width before tooling.
Minimum order for this item is 1,000 pcs. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Straps, Ties & Cinches
Back-to-Back Hook and Loop Strap Roll – 50 mm x 25 m, White
50 mm wide, 25 m per roll, 3.0 N/25 mm peel, white.
MOQ 1,000 pcs
Straps, Ties & Cinches
Reusable Hook and Loop Cable Tie – 12 mm x 45 cm, Red
12 mm x 45 cm red piece, 2.5 N/25 mm peel, ±0.3 mm die-cut tolerance.
MOQ 5,000 pcs
Straps, Ties & Cinches
Adjustable Strap with Tri-Glide Slider – 20 mm x 20 cm, Black
20 mm x 20 cm black piece, 2.7 N/25 mm peel, ±0.3 mm die-cut tolerance.
MOQ 1,000 pcs
Straps, Ties & Cinches
Heavy-Duty Webbing Strap – 38 mm x 50 cm, Grey
38 mm x 50 cm grey piece, 4.8 N/25 mm peel, ±0.3 mm die-cut tolerance.
MOQ 1,000 pcs