Straps, Ties & Cinches

Adjustable Strap with Tri-Glide Slider – 25 mm x 30 cm, Black

25 mm x 30 cm black piece, 2.8 N/25 mm peel, ±0.3 mm die-cut tolerance.

ConstructionAdjustable Strap with Tri-Glide Slider
Width25 mm
Length30 cm
ColourBlack
Minimum order1,000 pcs

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

ConstructionAdjustable Strap with Tri-Glide Slider
Width25 mm
Length30 cm
ColourBlack
Weight / piece2.9 g
Peel strength2.8 N/25 mm
Shear strength11 N/cm²
Cycle life5,000 cycles
Service temperature-20 °C to 75 °C
Pieces per carton1,000
Minimum order1,000 pcs
Production lead time15-25 days after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • 25 mm width held to ±0.5 mm across the full run
  • 2.8 N/25 mm peel measured on every lot
  • Each piece weighs about 2.9 g; 1,000 pieces to a carton.

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
25 mm x 50 cm Black 1,000 pcs
20 mm x 20 cm Black 1,000 pcs
20 mm x 30 cm Black 1,000 pcs
20 mm x 50 cm Black 1,000 pcs
25 mm x 80 cm Black 1,000 pcs
20 mm x 80 cm Black 1,000 pcs
25 mm x 20 cm Black 1,000 pcs

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.10 – 1.20 / pcFOB Xiamen · varies with width and order quantity

Produced to the same construction on every run, which is why converters reorder instead of resampling. It suits furniture trim, panel fixing and mid-weight strap assemblies. Lot reports covering width, peel and adhesive weight ship inside the carton.

Each piece weighs about 2.9 g; 1,000 pieces to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Match the strap to what it wraps, not to the load alone. Bundles under 30 mm do better with 12–16 mm ties, cable runs and tool handles with 20–25 mm, and anything carrying weight with 38 mm and a buckle rather than a tie. A strap that is too wide will not cinch tight enough to stop movement.

Common questions

What is 25 mm hook and loop used for?

At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Buckle or tie — which one?

A tie is faster to fit and cheaper, and is right for anything a technician opens daily. A buckle holds tension better and is what to specify when the strap has to stay tight under load without being re-adjusted. We supply both from the same webbing.

Can the straps be printed with our logo?

Yes, from 1,000 pieces on woven webbing. Send vector artwork; we will confirm the print area against the strap width before tooling.

What is the minimum order and lead time?

Minimum order for this item is 1,000 pcs. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Straps, Ties & Cinches

JINGWEI group Jingwei Hook Loop HOOKLOOP Hook and Loop Tape