38 mm wide, 25 m per roll, 3.3 N/25 mm peel, white.
| Construction | Self-Adhesive Hook and Loop Tape |
| Width | 38 mm |
| Length | 25 m |
| Colour | White |
| Minimum order | 200 rolls |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Construction | Self-Adhesive Hook and Loop Tape |
|---|---|
| Width | 38 mm |
| Length | 25 m |
| Colour | White |
| Weight / roll | 0.43 kg |
| Peel strength | 3.3 N/25 mm |
| Shear strength | 13 N/cm² |
| Cycle life | 5,000 cycles |
| Service temperature | -20 °C to 70 °C |
| Rolls per carton | 51 |
| Minimum order | 200 rolls |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 25 mm x 25 m | Black | 200 rolls |
| 12 mm x 25 m | Beige | 200 rolls |
| 12 mm x 50 m | Black | 200 rolls |
| 20 mm x 50 m | Black | 200 rolls |
| 100 mm x 50 m | Grey | 200 rolls |
| 12 mm x 25 m | Grey | 200 rolls |
| 12 mm x 25 m | White | 200 rolls |
| 25 mm x 25 m | Grey | 200 rolls |
| 38 mm x 50 m | White | 200 rolls |
| 50 mm x 50 m | Beige | 200 rolls |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerThis is a stock construction: 450 g/m² face, 3.3 N/25 mm peel and 5,000 open-close cycles before the hook flattens. Customers use it for seating, upholstery, automotive trim and load-bearing seams. Samples ship in 7 days, production in 15-25 days after approval.
Each 25 m roll weighs 0.43 kg; 51 rolls to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.
The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.
At 38 mm this construction is normally specified for seating, upholstery, automotive trim and load-bearing seams. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.
Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.
Minimum order for this item is 200 rolls. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.
Self-Adhesive Hook and Loop
Heavy-Tack Self-Adhesive Hook and Loop Tape – 25 mm x 25 m, Grey
25 mm wide, 25 m per roll, 3.5 N/25 mm peel, grey.
MOQ 100 rolls
Self-Adhesive Hook and Loop
Heavy-Tack Self-Adhesive Hook and Loop Tape – 50 mm x 25 m, Grey
50 mm wide, 25 m per roll, 3.8 N/25 mm peel, grey.
MOQ 100 rolls
Self-Adhesive Hook and Loop
Heavy-Tack Self-Adhesive Hook and Loop Tape – 50 mm x 50 m, Black
50 mm wide, 50 m per roll, 3.8 N/25 mm peel, black.
MOQ 100 rolls
Self-Adhesive Hook and Loop
Heavy-Tack Self-Adhesive Hook and Loop Tape – 50 mm x 25 m, Beige
50 mm wide, 25 m per roll, 3.8 N/25 mm peel, beige.
MOQ 100 rolls