Self-Adhesive Hook and Loop

Self-Adhesive Mounting Squares – 30 mm x 20 mm, White

30 mm x 20 mm white piece, 3.0 N/25 mm peel, ±0.3 mm die-cut tolerance.

ConstructionSelf-Adhesive Mounting Squares
Width30 mm
Length20 mm
ColourWhite
Minimum order500 m stock colour / 3,000 m dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

ConstructionSelf-Adhesive Mounting Squares
Width30 mm
Length20 mm
ColourWhite
Weight / piece0.3 g
Peel strength3.0 N/25 mm
Shear strength12 N/cm²
Cycle life5,000 cycles
Service temperature-20 °C to 80 °C
Pieces per carton500
Minimum order500 m stock colour / 3,000 m dyed
Production lead time15-25 days after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • 30 mm width held to ±0.5 mm across the full run
  • 3.0 N/25 mm peel measured on every lot
  • Each piece weighs about 0.3 g; 500 pieces to a carton.

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
25 mm x 50 m White 500 m stock colour / 3,000 m dyed
25 mm x 20 mm Beige 500 m stock colour / 3,000 m dyed
30 mm x 30 mm Beige 500 m stock colour / 3,000 m dyed
40 mm x 30 mm Black 500 m stock colour / 3,000 m dyed
12 mm x 20 mm Black 500 m stock colour / 3,000 m dyed
25 mm x 30 mm Grey 500 m stock colour / 3,000 m dyed
20 mm x 20 mm Grey 500 m stock colour / 3,000 m dyed
20 mm x 30 mm Grey 500 m stock colour / 3,000 m dyed
40 mm x 20 mm Grey 500 m stock colour / 3,000 m dyed
40 mm x 30 mm Grey 500 m stock colour / 3,000 m dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.08 – 1.20 / mFOB Xiamen · varies with width and order quantity

Cut from the same lot as the sample you approve, with the peel figure measured rather than quoted. It suits furniture trim, panel fixing and mid-weight strap assemblies. Lot reports covering width, peel and adhesive weight ship inside the carton.

Each piece weighs about 0.3 g; 500 pieces to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.

Common questions

What is 30 mm hook and loop used for?

At 30 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Will it stick to plastic crates or powder-coated metal?

Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.

How long before I can load it?

Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Self-Adhesive Hook and Loop

JINGWEI group Jingwei Hook Loop HOOKLOOP Hook and Loop Tape