16 mm wide, 25 m per roll, 2.7 N/25 mm peel, grey.
| Construction | High-Temperature Nylon Hook and Loop |
| Width | 16 mm |
| Length | 25 m |
| Colour | Grey |
| Minimum order | 100 rolls |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Construction | High-Temperature Nylon Hook and Loop |
|---|---|
| Width | 16 mm |
| Length | 25 m |
| Colour | Grey |
| Weight / roll | 0.19 kg |
| Peel strength | 2.7 N/25 mm |
| Shear strength | 11 N/cm² |
| Cycle life | 4,000 cycles |
| Service temperature | -30 °C to 150 °C |
| Rolls per carton | 114 |
| Minimum order | 100 rolls |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 20 mm x 25 m | Brown | 100 rolls |
| 25 mm x 25 m | Grey | 100 rolls |
| 30 mm x 25 m | Grey | 100 rolls |
| 16 mm x 25 m | Black | 100 rolls |
| 25 mm x 25 m | Brown | 100 rolls |
| 20 mm x 25 m | White | 100 rolls |
| 16 mm x 25 m | White | 100 rolls |
| 38 mm x 25 m | Brown | 100 rolls |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerCut from the same lot as the sample you approve, with the peel figure measured rather than quoted. Most orders go into general purpose closures, bags, packaging and display mounting. Minimum order is 100 rolls.
Each 25 m roll weighs 0.19 kg; 114 rolls to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.
Specify against the standard your customer audits, not against the word "specialty". FMVSS 302, UL94 V-2 and inherent aramid are three different tests with three different price points, and only one of them is the one you need.
At 16 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Car interiors are tested to FMVSS 302; electrical and electronic enclosures to UL94 V-2; protective clothing and welding environments normally need inherently flame-resistant meta-aramid rather than an additive. Tell us the standard your customer audits and we will quote the construction that meets it — and only that one.
Yes, issued against the production lot, naming the standard, the lab and the result. If a supplier offers a generic PDF with no lot reference, it will not survive an audit.
Minimum order for this item is 100 rolls. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.
Specialty & High-Performance
High-Temperature Nylon Hook and Loop – 16 mm x 25 m, Black
16 mm wide, 25 m per roll, 2.7 N/25 mm peel, black.
MOQ 100 rolls
Specialty & High-Performance
UV-Stabilised Outdoor Hook and Loop – 25 mm x 25 m, Grey
25 mm wide, 25 m per roll, 3.1 N/25 mm peel, grey.
MOQ 200 rolls
Specialty & High-Performance
High-Temperature Nylon Hook and Loop – 20 mm x 25 m, Brown
20 mm wide, 25 m per roll, 2.7 N/25 mm peel, brown.
MOQ 100 rolls
Specialty & High-Performance
UV-Stabilised Outdoor Hook and Loop – 38 mm x 25 m, Black
38 mm wide, 25 m per roll, 3.3 N/25 mm peel, black.
MOQ 200 rolls