Rolls & Back-to-Back Fasteners

Colored Hook and Loop Roll – 38 mm x 50 m, Beige

38 mm wide, 50 m per roll, 3.1 N/25 mm peel, beige.

ConstructionColored Hook and Loop Roll
Width38 mm
Length50 m
ColourBeige
Minimum order500 m stock colour / 3,000 m dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

ConstructionColored Hook and Loop Roll
Width38 mm
Length50 m
ColourBeige
Weight / roll0.82 kg
Peel strength3.1 N/25 mm
Shear strength12 N/cm²
Cycle life5,000 cycles
Service temperature-20 °C to 80 °C
Rolls per carton26
Minimum order500 m stock colour / 3,000 m dyed
Production lead time15-25 days after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • 38 mm width held to ±0.5 mm across the full run
  • 3.1 N/25 mm peel measured on every lot
  • Each 50 m roll weighs 0.82 kg; 26 rolls to a carton.

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
50 mm x 25 m Sand 500 m stock colour / 3,000 m dyed
38 mm x 50 m Red 500 m stock colour / 3,000 m dyed
50 mm x 25 m Blue 500 m stock colour / 3,000 m dyed
12 mm x 25 m Olive 500 m stock colour / 3,000 m dyed
12 mm x 50 m Red 500 m stock colour / 3,000 m dyed
12 mm x 25 m Red 500 m stock colour / 3,000 m dyed
50 mm x 50 m Olive 500 m stock colour / 3,000 m dyed
25 mm x 25 m Grey 500 m stock colour / 3,000 m dyed
75 mm x 25 m Beige 500 m stock colour / 3,000 m dyed
50 mm x 50 m Red 500 m stock colour / 3,000 m dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.06 – 0.85 / mFOB Xiamen · varies with width and order quantity

This is a stock construction: 430 g/m² face, 3.1 N/25 mm peel and 5,000 open-close cycles before the hook flattens. Customers use it for seating, upholstery, automotive trim and load-bearing seams. Samples ship in 7 days, production in 15-25 days after approval.

Each 50 m roll weighs 0.82 kg; 26 rolls to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.

Common questions

What is 38 mm hook and loop used for?

At 38 mm this construction is normally specified for seating, upholstery, automotive trim and load-bearing seams. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Are the rolls spliced?

No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.

Can you slit to a width that is not on the list?

Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Rolls & Back-to-Back Fasteners

JINGWEI group Jingwei Hook Loop HOOKLOOP Hook and Loop Tape