Rolls & Back-to-Back Fasteners

Colored Hook and Loop Roll – 38 mm x 50 m, Red

38 mm wide, 50 m per roll, 3.1 N/25 mm peel, red.

Construction	Colored Hook and Loop Roll
Width	38 mm
Length	50 m
Colour	Red
Minimum order	200 rolls

Request a quote Request a sample

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Construction	Colored Hook and Loop Roll
Width	38 mm
Length	50 m
Colour	Red
Weight / roll	0.82 kg
Peel strength	3.1 N/25 mm
Shear strength	12 N/cm²
Cycle life	5,000 cycles
Service temperature	-20 °C to 80 °C
Rolls per carton	26
Minimum order	200 rolls
Production lead time	15-25 days after sample approval
Packing	Poly bag + carton, palletised for LCL
Certification	REACH, RoHS; OEKO-TEX on request

What makes it different

38 mm width held to ±0.5 mm across the full run
3.1 N/25 mm peel measured on every lot
Each 50 m roll weighs 0.82 kg; 26 rolls to a carton.

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

Size	Colour	MOQ
50 mm x 25 m	Sand	200 rolls
50 mm x 25 m	Blue	200 rolls
38 mm x 50 m	Beige	200 rolls
12 mm x 25 m	Olive	200 rolls
12 mm x 50 m	Red	200 rolls
12 mm x 25 m	Red	200 rolls
50 mm x 50 m	Olive	200 rolls
25 mm x 25 m	Grey	200 rolls
75 mm x 25 m	Beige	200 rolls
50 mm x 50 m	Red	200 rolls

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Cut from the same lot as the sample you approve, with the peel figure measured rather than quoted. Typical use is seating, upholstery, automotive trim and load-bearing seams. Service temperature runs -20 °C to 80 °C.

Each 50 m roll weighs 0.82 kg; 26 rolls to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.

Ordering and shipping

Sold by the roll, carton or pallet — mixed widths allowed.
EXW Xiamen, FOB or CIF to your port.
T/T 30% deposit, balance against copy of B/L.
Sample orders ship by courier in 7 days.

Choosing this construction

Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.

Common questions

What is 38 mm hook and loop used for?

At 38 mm this construction is normally specified for seating, upholstery, automotive trim and load-bearing seams. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Are the rolls spliced?

No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.

Can you slit to a width that is not on the list?

Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.

What is the minimum order and lead time?

Minimum order for this item is 200 rolls. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.

More in Rolls & Back-to-Back Fasteners

Rolls & Back-to-Back Fasteners Back-to-Back Double-Sided Hook and Loop Roll – 75 mm x 50 m, Beige 75 mm wide, 50 m per roll, 3.0 N/25 mm peel, beige. MOQ 100 rolls

Rolls & Back-to-Back Fasteners Hook Tape Roll – Single Sided – 38 mm x 25 m, Brown 38 mm wide, 25 m per roll, 3.1 N/25 mm peel, brown. MOQ 500 rolls

Rolls & Back-to-Back Fasteners Bulk Self-Adhesive Hook and Loop Roll – 12 mm x 50 m, Grey 12 mm wide, 50 m per roll, 3.0 N/25 mm peel, grey. MOQ 200 rolls

Rolls & Back-to-Back Fasteners Hook Tape Roll – Single Sided – 38 mm x 50 m, Black 38 mm wide, 50 m per roll, 3.1 N/25 mm peel, black. MOQ 500 rolls