Straps, Ties & Cinches

Elastic Hook and Loop Strap – 38 mm x 60 cm, Black

38 mm x 60 cm black piece, 2.5 N/25 mm peel, ±0.3 mm die-cut tolerance.

Construction	Elastic Hook and Loop Strap
Width	38 mm
Length	60 cm
Colour	Black
Minimum order	1,000 pcs

Request a quote Request a sample

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Construction	Elastic Hook and Loop Strap
Width	38 mm
Length	60 cm
Colour	Black
Weight / piece	8.2 g
Peel strength	2.5 N/25 mm
Shear strength	9 N/cm²
Cycle life	4,000 cycles
Service temperature	-20 °C to 70 °C
Pieces per carton	500
Minimum order	1,000 pcs
Production lead time	15-25 days after sample approval
Packing	Poly bag + carton, palletised for LCL
Certification	REACH, RoHS; OEKO-TEX on request

What makes it different

38 mm width held to ±0.5 mm across the full run
2.5 N/25 mm peel measured on every lot
Each piece weighs about 8.2 g; 500 pieces to a carton.

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

Size	Colour	MOQ
25 mm x 40 cm	White	1,000 pcs
38 mm x 60 cm	White	1,000 pcs
20 mm x 25 cm	Black	1,000 pcs
38 mm x 40 cm	White	1,000 pcs
20 mm x 40 cm	Black	1,000 pcs
20 mm x 60 cm	Black	1,000 pcs
25 mm x 60 cm	Black	1,000 pcs
25 mm x 40 cm	Black	1,000 pcs
38 mm x 25 cm	Black	1,000 pcs
20 mm x 25 cm	White	1,000 pcs

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Woven in Xiamen and slit on a tension-controlled line, so the 38 mm width holds at both ends of the run. Most orders go into seating, upholstery, automotive trim and load-bearing seams. Minimum order is 1,000 pcs.

Each piece weighs about 8.2 g; 500 pieces to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.

Ordering and shipping

Sold by the roll, carton or pallet — mixed widths allowed.
EXW Xiamen, FOB or CIF to your port.
T/T 30% deposit, balance against copy of B/L.
Sample orders ship by courier in 7 days.

Choosing this construction

Match the strap to what it wraps, not to the load alone. Bundles under 30 mm do better with 12–16 mm ties, cable runs and tool handles with 20–25 mm, and anything carrying weight with 38 mm and a buckle rather than a tie. A strap that is too wide will not cinch tight enough to stop movement.

Read next How hook and loop actually works

Common questions

What is 38 mm hook and loop used for?

At 38 mm this construction is normally specified for seating, upholstery, automotive trim and load-bearing seams. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Buckle or tie — which one?

A tie is faster to fit and cheaper, and is right for anything a technician opens daily. A buckle holds tension better and is what to specify when the strap has to stay tight under load without being re-adjusted. We supply both from the same webbing.

Can the straps be printed with our logo?

Yes, from 1,000 pieces on woven webbing. Send vector artwork; we will confirm the print area against the strap width before tooling.

What is the minimum order and lead time?

Minimum order for this item is 1,000 pcs. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.

More in Straps, Ties & Cinches

Straps, Ties & Cinches Cinch Strap with Plastic Side-Release Buckle – 38 mm x 50 cm, Blue 38 mm x 50 cm blue piece, 2.9 N/25 mm peel, ±0.3 mm die-cut tolerance. MOQ 1,000 pcs

Straps, Ties & Cinches Heavy-Duty Webbing Strap – 50 mm x 100 cm, Grey 50 mm x 100 cm grey piece, 5.0 N/25 mm peel, ±0.3 mm die-cut tolerance. MOQ 500 rolls

Straps, Ties & Cinches Adjustable Strap with Tri-Glide Slider – 25 mm x 80 cm, Black 25 mm x 80 cm black piece, 2.8 N/25 mm peel, ±0.3 mm die-cut tolerance. MOQ 1,000 pcs

Straps, Ties & Cinches Adjustable Strap with Tri-Glide Slider – 20 mm x 30 cm, Black 20 mm x 30 cm black piece, 2.7 N/25 mm peel, ±0.3 mm die-cut tolerance. MOQ 1,000 pcs