12 mm x 100 mm black piece, 2.8 N/25 mm peel, ±0.3 mm die-cut tolerance.
| Construction | Self-Adhesive Hook and Loop Strips |
| Width | 12 mm |
| Length | 100 mm |
| Colour | Black |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Construction | Self-Adhesive Hook and Loop Strips |
|---|---|
| Width | 12 mm |
| Length | 100 mm |
| Colour | Black |
| Weight / piece | 0.5 g |
| Peel strength | 2.8 N/25 mm |
| Shear strength | 12 N/cm² |
| Cycle life | 5,000 cycles |
| Service temperature | -20 °C to 80 °C |
| Pieces per carton | 1,000 |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 20 mm x 100 mm | White | 500 m stock colour / 3,000 m dyed |
| 38 mm x 50 mm | White | 500 m stock colour / 3,000 m dyed |
| 38 mm x 150 mm | White | 500 m stock colour / 3,000 m dyed |
| 38 mm x 50 mm | Black | 500 m stock colour / 3,000 m dyed |
| 20 mm x 50 mm | Black | 500 m stock colour / 3,000 m dyed |
| 25 mm x 150 mm | Beige | 500 m stock colour / 3,000 m dyed |
| 38 mm x 100 mm | Beige | 500 m stock colour / 3,000 m dyed |
| 50 mm x 100 mm | White | 500 m stock colour / 3,000 m dyed |
| 20 mm x 100 mm | Black | 500 m stock colour / 3,000 m dyed |
| 20 mm x 50 mm | Beige | 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerWoven in Xiamen and slit on a tension-controlled line, so the 12 mm width holds at both ends of the run. It suits cable bundling, apparel closures and small adjustable straps. Lot reports covering width, peel and adhesive weight ship inside the carton.
Each piece weighs about 0.5 g; 1,000 pieces to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.
The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.
At 12 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.
Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Self-Adhesive Hook and Loop
Kiss-Cut Self-Adhesive Hook and Loop Roll – 20 mm x 50 m, White
20 mm wide, 50 m per roll, 2.9 N/25 mm peel, white.
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Low-Tack Removable Hook and Loop Tape – 25 mm x 25 m, White
25 mm wide, 25 m per roll, 2.0 N/25 mm peel, white.
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Tape – Rubber Glue – 12 mm x 25 m, Grey
12 mm wide, 25 m per roll, 3.0 N/25 mm peel, grey.
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Strips – 25 mm x 150 mm, Beige
25 mm x 150 mm beige piece, 3.0 N/25 mm peel, ±0.3 mm die-cut tolerance.
MOQ 500 m stock colour / 3,000 m dyed