Self-Adhesive Hook and Loop Strips – 50 mm x 100 mm, Grey
50 mm x 100 mm grey piece, 3.2 N/25 mm peel, ±0.3 mm die-cut tolerance.
| Construction | Self-Adhesive Hook and Loop Strips |
| Width | 50 mm |
| Length | 100 mm |
| Colour | Grey |
| Minimum order | 5,000 pcs |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
Specification
| Construction | Self-Adhesive Hook and Loop Strips |
|---|---|
| Width | 50 mm |
| Length | 100 mm |
| Colour | Grey |
| Weight / piece | 2.2 g |
| Peel strength | 3.2 N/25 mm |
| Shear strength | 12 N/cm² |
| Cycle life | 5,000 cycles |
| Service temperature | -20 °C to 80 °C |
| Pieces per carton | 500 |
| Minimum order | 5,000 pcs |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
What makes it different
- 50 mm width held to ±0.5 mm across the full run
- 3.2 N/25 mm peel measured on every lot
- Each piece weighs about 2.2 g; 500 pieces to a carton.
Other sizes in this construction
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 20 mm x 100 mm | White | 5,000 pcs |
| 38 mm x 50 mm | White | 5,000 pcs |
| 38 mm x 150 mm | White | 5,000 pcs |
| 38 mm x 50 mm | Black | 5,000 pcs |
| 20 mm x 50 mm | Black | 5,000 pcs |
| 25 mm x 150 mm | Beige | 5,000 pcs |
| 38 mm x 100 mm | Beige | 5,000 pcs |
| 50 mm x 100 mm | White | 5,000 pcs |
| 20 mm x 100 mm | Black | 5,000 pcs |
| 20 mm x 50 mm | Beige | 5,000 pcs |
Need a custom width or die profile?
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerAbout this product
This is a stock construction: 430 g/m² face, 3.2 N/25 mm peel and 5,000 open-close cycles before the hook flattens. Typical use is seating, upholstery, automotive trim and load-bearing seams. Service temperature runs -20 °C to 80 °C.
Each piece weighs about 2.2 g; 500 pieces to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.
Ordering and shipping
- Sold by the roll, carton or pallet — mixed widths allowed.
- EXW Xiamen, FOB or CIF to your port.
- T/T 30% deposit, balance against copy of B/L.
- Sample orders ship by courier in 7 days.
Choosing this construction
The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.
Common questions
What is 50 mm hook and loop used for?
At 50 mm this construction is normally specified for seating, upholstery, automotive trim and load-bearing seams. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Will it stick to plastic crates or powder-coated metal?
Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.
How long before I can load it?
Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.
What is the minimum order and lead time?
Minimum order for this item is 5,000 pcs. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.
More in Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop
Low-Tack Removable Hook and Loop Tape – 20 mm x 25 m, Beige
20 mm wide, 25 m per roll, 2.0 N/25 mm peel, beige.
MOQ 300 rolls
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Tape – Acrylic Glue – 25 mm x 50 m, White
25 mm wide, 50 m per roll, 3.0 N/25 mm peel, white.
MOQ 200 rolls
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Strips – 20 mm x 50 mm, Beige
20 mm x 50 mm beige piece, 2.9 N/25 mm peel, ±0.3 mm die-cut tolerance.
MOQ 5,000 pcs
Self-Adhesive Hook and Loop
Kiss-Cut Self-Adhesive Hook and Loop Roll – 38 mm x 50 m, White
38 mm wide, 50 m per roll, 3.1 N/25 mm peel, white.
MOQ 300 rolls