75 mm wide, 25 m per roll, 4.2 N/25 mm peel, grey.
| Construction | Wide Industrial Sew-On Hook and Loop Tape |
| Width | 75 mm |
| Length | 25 m |
| Colour | Grey |
| Minimum order | 50 rolls |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Construction | Wide Industrial Sew-On Hook and Loop Tape |
|---|---|
| Width | 75 mm |
| Length | 25 m |
| Colour | Grey |
| Weight / roll | 0.97 kg |
| Peel strength | 4.2 N/25 mm |
| Shear strength | 16 N/cm² |
| Cycle life | 8,000 cycles |
| Service temperature | -20 °C to 85 °C |
| Rolls per carton | 22 |
| Minimum order | 50 rolls |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 12 mm x 50 m | Beige | 50 rolls |
| 12 mm x 50 m | Black | 50 rolls |
| 10 mm x 50 m | Beige | 50 rolls |
| 10 mm x 50 m | Black | 50 rolls |
| 12 mm x 50 m | Grey | 50 rolls |
| 100 mm x 25 m | Black | 50 rolls |
| 150 mm x 50 m | Grey | 50 rolls |
| 12 mm x 25 m | Beige | 50 rolls |
| 75 mm x 50 m | Beige | 50 rolls |
| 150 mm x 25 m | Black | 50 rolls |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerCut from the same lot as the sample you approve, with the peel figure measured rather than quoted. Typical use is industrial fixing, wide panel mounting and heavy equipment covers. Service temperature runs -20 °C to 85 °C.
Each 25 m roll weighs 0.97 kg; 22 rolls to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.
Width is set by the seam, not by the load: 16–20 mm for apparel and light closures, 25–38 mm for bags and upholstery, 50 mm and above where the joint has to stay flat under load. Stitch through the tape, not beside it — a seam that stops short of the edge lets the corner lift and start a peel.
At 75 mm this construction is normally specified for industrial fixing, wide panel mounting and heavy equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Nylon tape survives repeated washing at 40 °C; colour fastness holds grade 4 after five washes on the dyed line. Dry cleaning solvents attack the hook monofilament over time, so specify polyester if the garment is dry-cleaned commercially. Stitch through the tape so the seam, not the adhesive, carries the load.
Yes. Every roll is supplied as a matched hook and loop pair unless you ask for single-sided hook or loop only, which we also supply for converters who already stock the other half.
Minimum order for this item is 50 rolls. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.
Sew-On Hook and Loop Tape
Colored Sew-On Hook and Loop Tape – 12 mm x 25 m, Grey
12 mm wide, 25 m per roll, 2.8 N/25 mm peel, grey.
MOQ 200 rolls
Sew-On Hook and Loop Tape
Colored Sew-On Hook and Loop Tape – 50 mm x 50 m, Yellow
50 mm wide, 50 m per roll, 3.2 N/25 mm peel, yellow.
MOQ 200 rolls
Sew-On Hook and Loop Tape
Elastic Hook and Loop Tape – 38 mm x 50 m, White
38 mm wide, 50 m per roll, 2.7 N/25 mm peel, white.
MOQ 150 rolls
Sew-On Hook and Loop Tape
Flame-Retardant Sew-On Hook and Loop Tape – 25 mm x 50 m, Black
25 mm wide, 50 m per roll, 2.8 N/25 mm peel, black.
MOQ 100 rolls