Rolls & Back-to-Back Fasteners

Hook Tape Roll – Single Sided – 38 mm x 50 m, Black

38 mm wide, 50 m per roll, 3.1 N/25 mm peel, black.

ConstructionHook Tape Roll
Width38 mm
Length50 m
ColourBlack
Minimum order500 m stock colour / 3,000 m dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

ConstructionHook Tape Roll
Width38 mm
Length50 m
ColourBlack
Weight / roll0.80 kg
Peel strength3.1 N/25 mm
Shear strength12 N/cm²
Cycle life5,000 cycles
Service temperature-20 °C to 80 °C
Rolls per carton27
Minimum order500 m stock colour / 3,000 m dyed
Production lead time15-25 days after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • 38 mm width held to ±0.5 mm across the full run
  • 3.1 N/25 mm peel measured on every lot
  • Each 50 m roll weighs 0.80 kg; 27 rolls to a carton.

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
50 mm x 50 m White 500 m stock colour / 3,000 m dyed
25 mm x 25 m White 500 m stock colour / 3,000 m dyed
20 mm x 50 m Brown 500 m stock colour / 3,000 m dyed
16 mm x 25 m Brown 500 m stock colour / 3,000 m dyed
38 mm x 25 m Brown 500 m stock colour / 3,000 m dyed
100 mm x 25 m Grey 500 m stock colour / 3,000 m dyed
75 mm x 25 m Grey 500 m stock colour / 3,000 m dyed
16 mm x 50 m Brown 500 m stock colour / 3,000 m dyed
75 mm x 25 m Black 500 m stock colour / 3,000 m dyed
25 mm x 50 m Black 500 m stock colour / 3,000 m dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.06 – 0.85 / mFOB Xiamen · varies with width and order quantity

Cut from the same lot as the sample you approve, with the peel figure measured rather than quoted. Customers use it for seating, upholstery, automotive trim and load-bearing seams. Samples ship in 7 days, production in 15-25 days after approval.

Each 50 m roll weighs 0.80 kg; 27 rolls to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.

Common questions

What is 38 mm hook and loop used for?

At 38 mm this construction is normally specified for seating, upholstery, automotive trim and load-bearing seams. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Are the rolls spliced?

No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.

Can you slit to a width that is not on the list?

Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Rolls & Back-to-Back Fasteners

JINGWEI group Jingwei Hook Loop HOOKLOOP Hook and Loop Tape