Specialty & High-Performance

Anti-Static Hook and Loop for Electronics – 30 mm x 25 m, Grey

30 mm wide, 25 m per roll, 2.8 N/25 mm peel, grey.

ConstructionAnti-Static Hook and Loop for Electronics
Width30 mm
Length25 m
ColourGrey
Minimum order150 rolls

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

ConstructionAnti-Static Hook and Loop for Electronics
Width30 mm
Length25 m
ColourGrey
Weight / roll0.32 kg
Peel strength2.8 N/25 mm
Shear strength11 N/cm²
Cycle life5,000 cycles
Service temperature-20 °C to 90 °C
Rolls per carton69
Minimum order150 rolls
Production lead time15-25 days after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • 30 mm width held to ±0.5 mm across the full run
  • 2.8 N/25 mm peel measured on every lot
  • Each 25 m roll weighs 0.32 kg; 69 rolls to a carton.

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
38 mm x 25 m Black 150 rolls
38 mm x 25 m White 150 rolls
25 mm x 25 m White 150 rolls
38 mm x 25 m Grey 150 rolls
16 mm x 25 m White 150 rolls
30 mm x 25 m White 150 rolls
25 mm x 25 m Black 150 rolls

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Cut from the same lot as the sample you approve, with the peel figure measured rather than quoted. Customers use it for furniture trim, panel fixing and mid-weight strap assemblies. Samples ship in 7 days, production in 15-25 days after approval.

Each 25 m roll weighs 0.32 kg; 69 rolls to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Specify against the standard your customer audits, not against the word "specialty". FMVSS 302, UL94 V-2 and inherent aramid are three different tests with three different price points, and only one of them is the one you need.

Common questions

What is 30 mm hook and loop used for?

At 30 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Which flame standard applies to my product?

Car interiors are tested to FMVSS 302; electrical and electronic enclosures to UL94 V-2; protective clothing and welding environments normally need inherently flame-resistant meta-aramid rather than an additive. Tell us the standard your customer audits and we will quote the construction that meets it — and only that one.

Do you supply the test report with the goods?

Yes, issued against the production lot, naming the standard, the lab and the result. If a supplier offers a generic PDF with no lot reference, it will not survive an audit.

What is the minimum order and lead time?

Minimum order for this item is 150 rolls. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.

More in Specialty & High-Performance