Sew-On Hook and Loop Tape

Heavy-Duty Sew-On Hook and Loop Tape – 10 mm x 50 m, Grey

10 mm wide, 50 m per roll, 5.3 N/25 mm peel, grey.

ConstructionHeavy-Duty Sew-On Hook and Loop Tape
Width10 mm
Length50 m
ColourGrey
Minimum order100 rolls

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

ConstructionHeavy-Duty Sew-On Hook and Loop Tape
Width10 mm
Length50 m
ColourGrey
Weight / roll0.31 kg
Peel strength5.3 N/25 mm
Shear strength22 N/cm²
Cycle life10,000 cycles
Service temperature-20 °C to 90 °C
Rolls per carton70
Minimum order100 rolls
Production lead time15-25 days after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • 10 mm width held to ±0.5 mm across the full run
  • 5.3 N/25 mm peel measured on every lot
  • Each 50 m roll weighs 0.31 kg; 70 rolls to a carton.

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
100 mm x 50 m Black 100 rolls
12 mm x 25 m Grey 100 rolls
50 mm x 25 m Grey 100 rolls
25 mm x 50 m Grey 100 rolls
38 mm x 50 m Black 100 rolls
25 mm x 25 m Beige 100 rolls
50 mm x 50 m Black 100 rolls
10 mm x 50 m Black 100 rolls
38 mm x 25 m Grey 100 rolls
38 mm x 50 m Beige 100 rolls

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Cut from the same lot as the sample you approve, with the peel figure measured rather than quoted. Customers use it for cable bundling, apparel closures and small adjustable straps. Samples ship in 7 days, production in 15-25 days after approval.

Each 50 m roll weighs 0.31 kg; 70 rolls to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Width is set by the seam, not by the load: 16–20 mm for apparel and light closures, 25–38 mm for bags and upholstery, 50 mm and above where the joint has to stay flat under load. Stitch through the tape, not beside it — a seam that stops short of the edge lets the corner lift and start a peel.

Common questions

What is 10 mm hook and loop used for?

At 10 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Can it be washed or dry-cleaned?

Nylon tape survives repeated washing at 40 °C; colour fastness holds grade 4 after five washes on the dyed line. Dry cleaning solvents attack the hook monofilament over time, so specify polyester if the garment is dry-cleaned commercially. Stitch through the tape so the seam, not the adhesive, carries the load.

Does it come in a matching hook and loop pair?

Yes. Every roll is supplied as a matched hook and loop pair unless you ask for single-sided hook or loop only, which we also supply for converters who already stock the other half.

What is the minimum order and lead time?

Minimum order for this item is 100 rolls. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.

More in Sew-On Hook and Loop Tape