Resources

Technical Resources

Six guides covering the questions that decide whether a fastener survives its first year: hook density, adhesive chemistry, material choice, test methods, die-cut tolerance and flame standards.

01 How Hook and Loop Actually Works Why two identical-looking tapes hold 200 g and 6 kg, what hook density and loop pile have to do with it, and how to tell the diffe… Read the guide 02 Choosing the Right Adhesive for Hook and Loop Acrylic, rubber or hot-melt — the wrong choice fails in a week, and the substrate decides which one is wrong. Includes a substrate… Read the guide 03 Nylon vs Polyester Hook and Loop Nylon wins on peel and cycles, polyester wins on UV, moisture and cost. The decision usually comes down to one question about the… Read the guide 04 Peel, Shear and Cycle Life: Reading the Numbers What N/25 mm actually measures, why a tape can be strong in peel and useless in shear, and how to set a safety factor that survive… Read the guide 05 Specifying Die-Cut Hook and Loop Parts Kiss-cut or through-cut, which liner, how much tolerance is realistic, and the four mistakes that turn a working part into a jamme… Read the guide 06 Flame-Retardant Hook and Loop: What the Standards Actually Require FMVSS 302, UL94 V-2 and inherent aramid are three different things. Specifying the wrong one costs money and fails the audit. Read the guide

Still deciding?

Answer four questions about the substrate, the load and the environment, and we will point you at the right construction.

Open the selector
JINGWEI group Jingwei Hook Loop HOOKLOOP Hook and Loop Tape