Applications

Where our fasteners end up, and which construction suits each substrate.

Pick the construction, not just the width

Hook and loop fails for one of three reasons: the adhesive lets go of the substrate, the hook flattens under load, or the loop fuzzes out after a few hundred cycles. Each application below is quoted with a specific construction because of that.

Apparel and footwear

Soft, thin, wash-fast. We supply 0.8 mm sew-on tape and narrow 10-16 mm rolls for cuffs, closures and adjusters, dyed to your Pantone reference with colour fastness grade 4 after five washes.

Automotive and transport

Flame-retardant nylon to FMVSS 302 and UL94 V-2 for trim, headliners and seat covers, plus 150 °C heat-stabilised tape for harness wrapping near the engine bay. Test reports travel with the lot.

Medical and PPE

Low-lint loop, soft hand, acrylic adhesive that does not plasticise under gamma or EtO sterilisation. Single-use die-cut parts on a peel-strip liner for automated lines.

Packaging and display

Coins and squares from 10 mm to 50 mm, kiss-cut on a continuous liner, plus low-tack and removable variants for temporary displays and returns-friendly packaging.

Furniture and seating

Heavy-density hook at 6.0 N/25 mm peel, rated for 10,000 open-close cycles under static load. Cushion attachment, headboard fixing and removable covers.

Industrial bundling

Reusable cable ties, cinch straps and back-to-back roll for harness bundling and equipment restraint, with eyelets and printable label versions.

Send the substrate, not just the part number

Powder-coated steel, polypropylene, plywood and glass each need a different adhesive. Tell us the surface and the load, and we will send two or three candidates rather than one guess.

JINGWEI group Jingwei Hook Loop HOOKLOOP Hook and Loop Tape