20 mm x 25 mm beige piece, 2.9 N/25 mm peel, ±0.3 mm die-cut tolerance.
| Construction | Self-Adhesive Mounting Squares |
| Width | 20 mm |
| Length | 25 mm |
| Colour | Beige |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Construction | Self-Adhesive Mounting Squares |
|---|---|
| Width | 20 mm |
| Length | 25 mm |
| Colour | Beige |
| Weight / piece | 0.2 g |
| Peel strength | 2.9 N/25 mm |
| Shear strength | 12 N/cm² |
| Cycle life | 5,000 cycles |
| Service temperature | -20 °C to 80 °C |
| Pieces per carton | 1,000 |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 25 mm x 50 m | White | 500 m stock colour / 3,000 m dyed |
| 25 mm x 20 mm | Beige | 500 m stock colour / 3,000 m dyed |
| 30 mm x 30 mm | Beige | 500 m stock colour / 3,000 m dyed |
| 40 mm x 30 mm | Black | 500 m stock colour / 3,000 m dyed |
| 12 mm x 20 mm | Black | 500 m stock colour / 3,000 m dyed |
| 25 mm x 30 mm | Grey | 500 m stock colour / 3,000 m dyed |
| 20 mm x 20 mm | Grey | 500 m stock colour / 3,000 m dyed |
| 20 mm x 30 mm | Grey | 500 m stock colour / 3,000 m dyed |
| 40 mm x 20 mm | Grey | 500 m stock colour / 3,000 m dyed |
| 40 mm x 30 mm | Grey | 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerWoven in Xiamen and slit on a tension-controlled line, so the 20 mm width holds at both ends of the run. Customers use it for general purpose closures, bags, packaging and display mounting. Samples ship in 7 days, production in 15-25 days after approval.
Each piece weighs about 0.2 g; 1,000 pieces to a carton. Tolerance on width is ±0.5 mm, on die-cut profile ±0.3 mm.
The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.
At 20 mm this construction is normally specified for general closures, bags, packaging, display mounting and low-load bundling. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.
Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Tape – Rubber Glue – 12 mm x 25 m, Beige
12 mm wide, 25 m per roll, 3.0 N/25 mm peel, beige.
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Tape – Rubber Glue – 12 mm x 25 m, Black
12 mm wide, 25 m per roll, 3.0 N/25 mm peel, black.
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Tape – Acrylic Glue – 38 mm x 50 m, White
38 mm wide, 50 m per roll, 3.1 N/25 mm peel, white.
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Heavy-Tack Self-Adhesive Hook and Loop Tape – 50 mm x 25 m, Grey
50 mm wide, 25 m per roll, 3.8 N/25 mm peel, grey.
MOQ 500 m stock colour / 3,000 m dyed